www.megadrum.info

Hi! Today I was tinkering with my MegaDrum, MPC1000 and KeyStep Pro and I needed to change the MIDI channel. Mine sends on MIDI channel 1. I don't know if I set that in MegaDrumManager or if it's the default.
Anyhow, I would like to change the output channel to something else. Is there a way to do this for all inputs on the fly or do I need to use the manager software?

Thanks in advance

Change channels on all inputs on the fly? The quickest way to do it in MDMFX is to change a channel on one input, then copy it to all other inputs ( button [c] next to this and all other settings) and then send the whole config to MegaDrum.

Thanks!